 |
 |
 |
|
|
| Fannon Products, LLC has been manufacturing
quality infrared lamps and equipment since 1954. Our primary
business over the years has been in the automotive industry,
drying automotive paints. Over the past few years, we
have worked with the larger direct mailing companies on
developing an affordable, more efficient ink-jet drying
system. Today, users such as Harte-Hanks, Vertis, Quad
Graphics, USA Direct, Japs-Olson and many others are realizing
the savings and increased profits by operating Fannon
Ink-Jet drying systems. |
|
All Fannon “LightSpeed” ink-jet drying systems utilize
our patented, energy efficient “Goldenrod” infrared
lamps. Our infrared lamps incorporate a 24K gold reflector that
directs and focuses virtually 100% of the infrared energy where
it is needed, at the paper.
The focused infrared heat and air-flow design provides a few
major advantages:
| Faster line speeds |
| Reduced electrical
consumption |
| Lower belt and surrounding
equipment temperatures |
| “Cool to
the touch” drying modules for safe and comfortable operators |
| Eliminate paper fires |
| Prolonged lamp life
|
All Fannon “LightSpeed”
drying systems come standard with the following features and
benefits:
| Stainless
steel, powder coated drying modules |
| Standard, readily available
blowers |
| Fannon energy-efficient
infrared lamps |
| Control system with
0-100% output adjustment, emergency stop pushbutton |
| Transport interlock
circuit, 24 Volt or 120 Volt |
| Pre-wired power cords
|
| Mounting angles ready
to mount to most webs or transports |
| Capable of operating
horizontally or vertically |
| Can operate on top
of transport, or mount underneath for duplex printing |
| High quality, readily
available electronic components |
| 1-year warranty on
all parts and labor |
| Guaranteed low replacement
lamp cost |
| Ready to plug in and
dry |
“LightSpeed”
Series LSHII-2 & LSHII-3
Designed to dry up to a 2” wide ink pattern at line speeds ranging
from 250-1000 FPM
| The “LightSpeed”
LSHII-2 & LSHII-3 drying systems are designed for the
1” print-heads and will dry up to a 2” wide ink pattern |
| Available in 10”, 16”,
25”, 38”, and 58” heated lengths |
| Voltage: 208, 240,
415, 480, and 575 Volt, 1 or 3-phase |
|
16” Heated length
dryer |
10” Drying system with controls
and mount |
“LightSpeed”
Series LSHII-3W & LSHII-4
Designed to dry up to a 3.25” wide ink pattern at line speeds
ranging from 300-1000 FPM
| The “LightSpeed”
LSHII-3W & LSHII-4 drying systems are designed for the
2.77” print-heads and will dry up to a 3.25” wide ink
pattern. |
| Available in 16”, 25”,
38”, and 58” heated lengths |
| Voltage: 208, 240,
415, 480, and 575 volt, 1 or 3 phase |
|
25” Heated length dryer
with center mount bracket |
|
“LightSpeed”
Series LSHII-6
Designed to dry up to a 5.5” wide ink pattern at line speeds
ranging from 300-1000 FPM
| The “LightSpeed”
LSHII-6 drying systems are designed for the 4.25” print-heads
and will dry up to a 5.5” wide ink pattern |
| Available in 16”, 25”,
38”, and 58” heated lengths |
| Voltage: 208, 240,
415, 480, and 575 Volt, 1 or 3 phase |
|
25” Heated length dryer
for 4.25” print heads |
|
“LightSpeed”
Series FPDH
The “LightSpeed” FPDH dual drying systems are designed to dry
(2) separate ink patterns or push together and dry (1) wide
ink pattern
| Typical
line speeds ranging from 300-1000 FPM |
| 1”, 2.77”, 4.25” and
9” dual systems available |
| Available in 16”, 25”,
38” and 58” heated lengths |
| Voltage: 240, 415,
480, 575 volt, 1 or 3 phase |
|
Dual 25” heated length dryers
for (2) 2.77” print heads |
|
“LightSpeed”
Series FPW
Designed to dry up to a 40” wide ink pattern. The “LightSpeed”
FPW web drying systems are designed to dry ink-jet printing
on web presses. Drying modules are available in 16”, 25”,
38”, and 58” heated lengths, and 12”, 18”,
24”, 30”, 36”, and 42” heated widths.
Drying modules are divided into 6” wide heat zones that
can be selectively turned ON or OFF across the web. Typical
line speeds range from 300 – 1000 FPM.
| Custom
size web dryers are available upon request |
| Voltage: 208, 240,
415, 480, and 575 Volt, 1 or 3 phase |
|
Multi-head sheet fed or
web drying application with consolet panel for user friendly
controllability |
Vertical web dryer for duplex
printing or glue drying. 38” heated length |
| Model:
FPMB1 Fannon Table-top Mounting Bracket Assembly w/ Tilt
Mechanism |
|
Standard table top mounting
bracket with tilt mechanism. For 10”, 16”
and 25” dryers. |
|
| Model:
FPMB2 Fannon Box Style Mounting Bracket Assembly |
| Box
style table top mount with tilt mechanism for easy access
to lamps. |
|
|
 |
 |
|
