 |
 |
 |
|
|
| Fannon
Products, LLC manufactures over 1000 different quartz
Infrared lamps for commercial or industrial use. Fannon
has been manufacturing quartz infrared lamps since 1954.
Lamps can be made in virtually any length, wattage, voltage
and with a variety of end terminations. Fannon Products,
LLC manufactures short and medium wavelength infrared
lamps in the standard design or “Goldenrod” design, which
incorporates a high efficiency gold reflector that directs
the infrared energy where it is needed. |
|
Gold is proven to be the best reflector of infrared radiation.
A standard infrared lamp will emit infrared in a 360 degree
heat pattern, thus relying on a secondary reflector to direct
over half of the infrared toward the object being heated. Secondary
reflectors quickly become dirty and inefficient. Fannon Products,
LLC manufactures infrared lamps with an integral gold reflector
built into the lamp that makes the lamp directional, and offers
distinct advantages:
| 23.5% more efficient
than a standard lamp that utilizes a secondary reflector |
| Virtually 100% of the
infrared energy is directed toward the object being heated,
with minimal waste |
| Eliminates the need
for costly, heavy, inefficient secondary reflectors |
| Upgrade outdated equipment
and improve radiant efficiency |
| Keeps interior equipment
surfaces and surrounding equipment cooler |
| Increase in efficiency
allows for reduction in lamp output, extending lamp life |
| Can be
grouped together for very high watt densities |
| Specific IR dispersion
angles from lamps |
| Snap-in design for
quick and easy installation; no wire connections necessary |
|
IA-43C Block Connector |
IA-43 Snap Cap Connector |
The Goldenrod medium-wave infrared lamp is a directional lamp
design that contains its own integral reflector. The infrared
energy is dispersed out of the tube in one direction without
the need for an external reflector. The gold reflector is coated
on the quartz tube that directs the energy toward the work in
process. The reflector cannot become soiled because it is integral
to the product. Some of the features of the Goldenrod Directional
Medium-Wave Infrared Lamp are:
| Available in virtually
any length, wattage, and voltage |
| Can be made to operate
in the horizontal and/or vertical position |
| A variety of resistance
alloys available for operation up to 2000 degrees F |
| Available in clear
or translucent quartz, single-tube or twin-tube design |
| Long life – up
to 10,000 hours of actual burning time |
| Reasonably fast thermal
response for precise control |
| Saves 23.5% energy
expense compared to standard IR tubes |
| Integral reflector
keeps interior equipment surfaces and surrounding equipment
much cooler |
| Snap-in
design available; no wire connections necessary |
| Specific IR dispersion
angles from lamp are available |
| Affordable pricing |
Fannon Products, LLC will manufacture
standard infrared lamps in any length, wattage and voltage for
new applications or for replacement lamps for any existing equipment.
Our quality is the best, and our pricing and delivery cannot
be beat!
In applications where medium-wave
infrared is required and the thermal response of the lamp is
critical, Fannon Products, LLC manufactures Fast Response Medium-Wave
Infrared Lamps. These lamps are available as standard or with
a gold reflector, and can be made in virtually any length, wattage
and voltage.
Fannon Products, LLC offers a medium-wave
Infrared lamp that is Instant ON/OFF. This lamp is currently
available in a 17.25” heated length (19.75” OAL)
and a 21” heated length (23.75” OAL). Custom sizes
are also available.
|
|
| Instant
On/Off medium wave tungsten emitter |
The Fannon gold-backed short-wave infrared lamp is a directional
design that contains its own integral reflector. The infrared
energy is dispersed out of the tube in one direction, without
the need of a secondary reflector. There is an outer quartz
tube that contains the gold reflector which surrounds the inner
quartz tube. This provides an air space (360 degrees) around
the inner tube. This provides many advantages for protection
and function. Some of the features of the Goldenrod Directional
Short-Wave lamp are:
| Instant thermal response
for precise control |
| Saves 23.5% energy
expense compared to standard lamps |
| Available heated lengths:
1”, 5”, 8”, 10”, 16”, 25”,
28”, 38”, 40”, 53”, 58” |
| Single or twin-tube
design |
| Horizontal and vertical
operation available |
| Tungsten filament for
burning temperature up to 4000 degrees F |
| No secondary reflector
required to direct energy toward work in process |
| Air space provides
superior heat dissipation to protect gold reflector |
| Can be
grouped together for very high watt densities |
| Snap-in design available;
no wire connections necessary |
| Integral reflector
keeps interior equipment surfaces and surrounding equipment
much cooler |
| Specific IR dispersion
angles from lamp are available |
| Custom lengths, wattage,
and operating voltages are available |
| Long life, affordable
pricing |
|
|
| Short wave gold backed tube-n-tube infrared emitter |
Fannon Products, LLC sells standard
short-wave infrared lamps for new applications or for replacement
lamps for any existing equipment. Available heated lengths are
5”, 8”, 10”, 16”, 25”, 38”, and 58”. Custom sizes, wattage and
voltages are available. Our quality is the best, and our pricing
and delivery are hard to beat!
| |
| Standard T-3 short-wave infrared emitter |
|
|
 |
 |
|
