Fannon Products is proud to offer Ink Jet Drying Systems to perfectly fit your needs.
With our “LightSpeed” and "Near Infrared" models, our drying systems are designed to dry even the most demanding water-based inkjet applications by efficiently transferring energy for faster line speeds, cooler substrates and surrounding equipment, and reduced electrical consumption.
Fannon LightSpeed InkJet Drying Systems
Fannon "LightSpeed" InkJet Drying Systems are designed to dry water based and solvent based inks on all types of glossy and non-glossy substrates. These systems utilize highly efficiency short wavelength Infrared lamps with our patented 24K gold reflector that focuses the infrared energy into the ink pattern.
Fannon IR Dryers work at high speeds for a low cost. Our unique lamps allow ink to dry efficiently, so that less energy is being wasted, and more money stays in your company's pocket.
All Fannon "LightSpeed" InkJet Drying Systems utilize their patented, energy efficient, “Goldenrod” infrared lamps, which incorporate a 24K gold reflector that directs and focuses virtually 100% of the infrared energy where it is needed--at the paper.
Advantages of Fannon LightSpeed InkJet Drying :
By focusing the energy where it is needed, our customers experience the following advantages:
- Faster Line Speeds
- Reduced electrical consumption
- Lower belt and surrounding equipment temperatures
- Cool to the touch" drying modules
- Safe and comfortable operators
Included with the LightSpeed InkJet Drying System:
- Drying module, Pre-wired power cords with multi-pin quick disconnect
- Fannon "high efficiency" Quartz Infrared lamps w/ 24K gold reflector
- Control system w/ 0-100% output adjustment
- Safety Interlock circuit and emergency stop pushbutton
- Quick disconnect package for quick and easy installation
- OPTION: Automatic Power Adjustment via. Tachometer
Fannon LightSpeed InkJet Drying Systems Specs
-
Designed to dry up to a 2" ink pattern
- FP-4000, 4000 Watt, 208-240 Volt, 17 Amp, 10" heated length
- FP-6400, 6400 Watt, 208-240 Volt, 27 Amp, 16" heated length
- FP-10000, 10000 Watt, 208-240 Volt, 42 Amp, 25" heated length
Designed to dry up to a 4.25" ink pattern
- FP-3000, 3000 Watt, 208-240 Volt, 12.5 Amp, 10" heated length
- FP-4800, 4800 Watt, 208-240 Volt, 20 Amp, 16" heated length
- FP-9000, 9000 Watt, 208-240 Volt, 38 Amp, 16" heated length
Designed to dry up to a 5.5"+ ink pattern
- FP-8000, 8000 Watt, 208-240 Volt, 34 Amp, 16" heated length
- FP-15000, 15000 Watt, 208-240 Volt, 62 Amp, 25" heated length
- FP-21900, 21900 Watt, 480 Volt, 46 Amp, 38" heated length
* Also available in 277, 480, 575 Volt
* Custom sizes available upon request
Fannon "Near Infrared" InkJet Drying Systems
Fannon "LightSpeed" InkJet Drying Systems are designed to dry water based and solvent based inks on all types of glossy and non-glossy substrates. These systems utilize highly efficiency short wavelength Infrared lamps with our patented 24K gold reflector that focuses the infrared energy into the ink pattern.
Fannon IR Dryers work at high speeds for a low cost. Our unique lamps allow ink to dry efficiently, so that less energy is being wasted, and more money stays in your company's pocket.
All Fannon "LightSpeed" InkJet Drying Systems utilize their patented, energy efficient, “Goldenrod” infrared lamps, which incorporate a 24K gold reflector that directs and focuses virtually 100% of the infrared energy where it is needed--at the paper.
Included with Fannon Near-Infared InkJet Dyring Systems:
- Drying module, Pre-wired power cords with multi-pin quick disconnect.
- Fannon "high efficiency" Near Infrared lamps
- Control system w/ 0-100% output adjustment.
- Safety Interlock circuit and emergency stop pushbutton.
- Quick disconnect package for quick and easy electrical installation.
- Fannon mounting bracket assembly, complete w/ control panel mount, all required glare reduction shielding, safety tilt switch, and all mounting hardware.
OPTIONAL: Automatic Power Adjustment via. Tachometer
Fannon "Near Infrared" InkJet Drying Systems Specs
-
Designed to dry up to a 2" ink pattern
- FP-4320-10-2-NI, 4320 Watt, 208-240 Volt, 18 Amp, 10" heated length
- FP-6480-16-NI, 6480 Watt, 208-240 Volt, 27 Amp, 16" heated length
Designed to dry up to a 3.25" ink pattern
- FP-2400-6-NI, 2400 Watt, 208-240 Volt, 10 Amp, 6" heated length
- FP-4320-10-NI, 4320 Watt, 208-240 Volt, 18 Amp, 10" heated length
- FP-6480-16-NI, 6480 Watt, 208-240 Volt, 27 Amp, 16" heated length
Designed to dry up to a 4.75" ink pattern
- FP-6480-10-NI, 6480 Watt, 208-240 Volt, 27 Amp, 10" heated length
- FP-9720-16-NI, 9720 Watt, 208-240 Volt, 40 Amp, 16" heated leng
- FP-10000-25-NI, 10000 Watt, 208-240 Volt, 42 Amp, 25" heated length
* Also available in 277, 480, 575 Volt
* Custom sizes available upon request